UV/LED Combination lamp for gel nails, white – 48W

48W UV LED lamp with timer settings 30s, 60s and 99 seconds, suitable for professional as well as home use. It contains 24 strategically placed LED lamps with a lifespan of more than 50,000 hours. It guarantees faster curing of UV and LED gels.

Supply voltage: 100-240V, 50/60Hz

Dimensions: 220mm x 195mm x 105mm (L x W x H)

User guide

1. Connect the adapter to the device and plug it into an electrical outlet.
2. Press the appropriate timer button to select the desired operation time (30s, 60s, 99s).
3. If you press the timer button during curing, the timer will be reset.
4. Place your hand under the lamp and the infrared sensor will start the curing process. The default mode lasts 99 seconds.
5. Press the appropriate button (30 seconds, 60 seconds) for approximately 2 seconds to activate the appropriate curing mode. Press again for 2 seconds or press another timer to cancel.
6. Press the 99s button for 2 seconds to double the power (48W). Press again for 2 seconds to end the operation of the device (works only in 30s and 60s mode). Pressing the 99s button for 0.5s activates the low heat mode, which allows you to increase performance.
7. Press the 30s or 60s button, the timer will start counting down. Press the 99s button or when the infrared sensor is activated, the timer starts counting.

Image shown is for illustration purposes only.